BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press
BG 180° Stand for Convertible Hand or Foot Press

BG 180° Stand for Convertible Hand or Foot Press

Regular price $824.31
/
Tax included. Shipping calculated at checkout.

Only 1 items in stock!

BG Stand for 180° Convertible Hand or Foot Press

What's Included:

  • Stand only (does not include the pedal system)
  • Tool set for assembly

Sold Separately:

  • 180° Convertible Hand or Foot Press
  • Pedal System
  • Depth plate with distance measurements
  • Support plate with distance measurements
  • Rivet Setter Dies, Snap Setters, Grommet Setters, Hole Punches, Magnet Setters

 

Features:

  1. 8" x 10" Table Top: The large wood surface provides a tool rack for adaptors and space for your supplies.

 

  1. 5 Height Levels: Each level adjustment is 2" inches (5cm) 
    1. Lowest height adjustment (position #1) = 30" inches (76cm). Good for seated position or shorter person.
    2. Highest height adjustment (position #5) = 38" inches (97cm). Good for standing position.

 

  1. Press Mounting: Safely secure the BG 180° press to the table top with 4 included bolts. The bottom 'arm' of the press will overhang 3.5" inches.
  2. Leveling Screw: The back right leg has a leveling screw to minimize rocking on uneven floors.
  3. Base Screw Holes: There are 4 precut holes, one on each foot of the stand so you can screw the stand directly into a sturdy base if desired. Additionally provided are 2 cement screws for bolting to a cement floor.
  4. Convertible: Once you're ready, purchased separately is the BG Pedal System to convert this stand to a kick press.

The development of the BG 180° Hand/Foot Press

Our hand press design took over 2 years in development and testing. We reviewed countless hand presses from decades past and those on the market today from simple entry level presses to full production presses. We learned the key elements on each of the presses, what set them apart, and what they lacked. We made sure the expected functions of a press were adopted and then added new features along with the ability to add components and accessories down the road. The press is made to suit both crafters and large manufactures. Our production partner in Europe is a team of engineers that specialize in manual and automated presses for leather and textile manufacturers. We leaned on their decades of engineering knowledge to enhance the press with features that modernized the basic hand press. Read more about its development.

 

Selected

Tanneries from EUROPE

Read MORE

Quality

Your word is our command

CONTACT US

Recently viewed